Please retain product label and instructions for future reference
70mm
screw
Pre drill
hole
40mm
screw
8
2
4
Step 2
Parts Needed - No. 4 QTY 2
No. 8 QTY 2
Following the method outlined
in the illustration, secure one
starter board (No. 4) onto each of
the small bearers
(No. 2),
using
1x70mm screws per board,
ensuring to screw through the
notch into the bearer below.
Make sure that the end of starter
board (
No. 4
) is flush with end of
the small bearer (
No. 2.
)
Place the first two log boards
(No.8) onto the starter boards
(No.4) and rest onto the bearers as
shown in the illustration.
Once in position fix the log board
to the inside of the cabin using
2x40mm screws per log board.
*The centre bearer at this
point is not fixed into position,
arrange so that the bearer is
central.
4x40mm Screws
2x70mm Screws
P 4
4
8
4
8
.
8
7
5
5
5
6
Step 3
Parts Needed - No. 5 QTY 18
No. 6 QTY 2
No. 7 QTY 6
No. 8 QTY 6
Following the method outlined
in the illutration, continue placing
the boards (No. 5, 7 & 8) on to the
veranda sides as shown in the illus-
trations, ensuring to interlock the
boards.
Once in position fix the top log
board
(No.6)
on each side to the
inside of the cabin using 2x40mm
screws per log board.
4x40mm Screws
Pre drill
hole
40mm
screw
6
5
5
8
7
8
8
7
7
Rubber Mallet
may be required
to fit parts.
6
For assistance please contact customer care on: 01636 821215
Mercia Garden Products Limited,
Sutton On Trent,
Newark,
Nottinghamshire,
NG23 6QN
www.merciagardenproducts.co.uk