P 3
Please retain product label and instructions for future reference
Step 1
Parts needed - No. 5 QTY 1
Place the floor on a firm and
level base, ensure that the base
has suitable drainage, free from
areas where standing water can
collect. (see front page on base
requirements).
5
6
1
12
Step 2
Parts needed - No. 1 QTY 1
No. 6 QTY 1
No. 12 QTY 3
Place the door
(No. 6)
within the Door
Gable
(No. 1)
. Fix the T Hinges
(No. 12)
onto the door
and Door Gable as shown
(taking into account on which side of
the Door Gable opening you want the
Door to open)
. Ensure that the screws
go through the cladding and into the
framing behind.
21x30mm Screws
Pre drill
hole
30mm
screw
**PLEASE NOTE**
Before fitting the
hinges, ensure the door is in the correct
position depending on which side you
want the door to open. See external
illustration which show the doors
internal framing.
Step 3
Parts needed - No. 9 QTY 1
No. 11 QTY 1
Attach the bolt block
(No. 9)
to the
inside of the door, line the block with
the end of the centre framing and secure
using 2x30mm screws.
2x30mm Screws
Fix the pad bolt
(No. 11)
to the door using
10x30mm black screws. Ensure to align the
pad bolt with the door’s framing and the bolt
block.
10x30mm Screws
a
b
11
Pre drill
hole
30mm
screw
Pre drill
hole
30mm
screw
b
a
9