35mm Bolt x x4
Nail Bag
50mm Screw x 32
40mm Screw x 22
Felt Tacks x 75
30mm Screw x 34
10mm Screw x 14
25mm Black Screw x 7
25mm Screw x 36
Remove transportation blocks
from the bottom of each panel
before beginning assembly.
Each panel should have two
blocks.
Step 1
Place the floor on a firm and
level base, ensure the base has
suitable drainage free from areas
where standing water can
collect. (See front page on base
requirements).
Step 2
4
Fix the Butt Hinges to the Door Gable
using 30mm screws ensuring that the
screws go through to the framing.
Step 3
36x 25mm Screws
1
14
5
6
30mm
screw
Step 4
Fix the corners with 50mm
screws as shown in diagram.
Position the panels so there is equal spacing
between the floor and cladding on all 4 sides
3 x 50mm Screws
2
3
50mm
screw
