P 3
Please retain product label and instructions for future reference
Nail Bag
There may be extra screws present in the nail bag
40mm Screw QTY 18
Felt Tacks QTY 110
25mm Screw QTY 22
30mm Screw QTY 95
50mm Screw QTY 86
35mm Bolt QTY 4
10mm Screw QTY 12
Pre Assembly
Before assembling remove the transportation
blocks from the bottom of each panel.
Take care removing the blocks as to not damage
the panels. Tap with a flat headed screwdriver
and hammer.
Dispose of the blocks once removed.
Step 1
Parts needed - No. 1 QTY 1
- No. 9 QTY 1
- No. 10 QTY 1
- No. 21 QTY 2
- No. 23 QTY 6
Fix the hinges to the master
(No. 9)
and
secondary
(No. 10)
doors and to the door
panel
(No. 1)
using 3x butt hinges
(No. 23)
per door. Ensure to predrill holes.
* Fix to the door using 3x25mm screws &
3x30mm screws to the Door Panel per
hinge, ensure the doors open freely.
Fix the door handles
(No. 21)
to the outside
of the master and secondary door using
the 35mm bolts provided.
4x35mm Bolts
18x25mm Screws
18x30mm Screws
Pre drill
hole
25mm
screw
30mm
screw
35mm
bolt
23
21
1
9
10
Step 2
Parts needed - No. 22 QTY 1
- No. 27 QTY 2
Secure the barrel bolts
(No. 27)
to the
top & bottom of the secondary door using
6x10mm screws. Pre-drill the holes
beforehand. Drill a hole in the framing
above and below the door for the barrel
bolt to fix into.
Attach the press lock
(No. 22)
to the
master door with 4x25mm screws, aligning
the barrel with the key hole.
*Ensure the key turns and locks properly
before fixing to the door.
12x10mm Screws
4x25mm Screws
Pre drill
hole
10mm
screw
25mm
screw
10
9
27
1
22