P 13
Step 28
Parts needed - No. 34 previously
cut in to pieces in step 14.
Position the four largest pieces
of felt that you have cut (if you have
not yet cut your felt please refer to
Step 14) at the bottom of each side
of the roof and fix with evenly
spaced felt tacks.
Make sure the felt
overhangs by 50mm. Trim as
required.
Take the 2300mm long strip
of felt cut in Step 14 and place it at
the top of the roof and fix using felt
tacks.
Make sure the felt overlaps by
50mm.
Using the four strips of felt cut
in Step 14 place them over each of
the ridges in the roof and fix using
felt tacks, avoid felt tack already on
the roof.
Secure all of the felt using felt tacks
with even spaces of 100mm
between each tack.
300x Felt tacks
C
B
A
A
B
C
1
2
3
4
34
Step 29
Parts needed - No. 19 QTY 4
No. 20 QTY 2
Secure the Fascias
(No. 19 & 20)
to the building using 3 screws
per piece.
The Fasicas for the side of the
building should be secured last
and will need to be cut to
length.
*Ensure to screw through the
fascia into the eaves frame
behind avoiding any other
screws.
24x30mm Screws
Pre drill
hole
30mm
screw
20
20
19
19
19
19
*
trim to fit
Step 30
Parts needed - No. 20 QTY 1
No. 33 QTY 2
Before fitting the Roof Cap Fascia
and the Finials to the Summer
House, secure from underneath the
two Finials
(No. 33)
to either each
end of the Roof Cap Fascia
(No. 20)
by using one 50mm screw per
Finial.
2x50mm Screws
20
33
33
Pre drill
hole
50mm
screw
Please retain product label and instructions for future reference
