Please retain product label and instructions for future reference
DO NOT ALLOW YOUR CHILD TO PLAY WITH ANY
COMPONENT PARTS PRIOR TO ASSEMBLY.
www.merciagardenproducts.co.uk P5
Step 3
Parts needed - No. 4 QTY 1
No. 10 QTY 4
If purchased with a tower please read both
sets of instructions before beginning
assembly.
Lay the Floor Joists
(No. 10)
under the Floor
Sheet
(No. 4)
with an even space between
each one. Position the joists flush on one side
of the floor sheet and mark the centers of
joists onto either end. Fix using 4 x30mm
screws per joist.
Place the floor on your firm and level base,
ensuring base has suitable drainage free from
areas where standing water can collect.
16x30mm screws.
30mm
screw
4
10
1!
2!
Pre drill
hole
Step 4
Parts needed - No. 2 QTY 1
No. 3 QTY 1
Locate the Plain Gable
(No.2)
to a Plain
Side
(No. 3)
.
Fix together by securing at the corners
with 3x50mm screws as shown in the
illustration.
Do not secure the building to the floor
until after the roof has been fitted.
Position the panels so there are equal gaps
between the floor and cladding.
3x50mm screws.
50mm
screw
2
3
1!
2!
Pre drill
hole
