It is ESSENTIAL that you apply wood
treatment immediately after the building
has been assembled.
AFTER TREATMENT:
score around protective
cover on glazing and
carefuly peel
covering back
Please retain product label and instructions for future reference
Step 16
Fit the cover trims and finials to
the gable sides securing with
12x40mm screws as shown in
the illustration.
*Before fixing into place measure
and cut down the cover trims to
size.
12x40mm Screws
*
Cut down trims to fit
40mm
screw
Pre drill
hole
21
12
12
21
12
12
Step 14
Fix the casement say to the
window then align the fixings
to the window panel.
*Ensure the casement stay fits
onto the fixings before securing
in place.
6x16mm Screws
16mm
screw
Pre drill
hole
22
30mm
screw
Pre drill
hole
19
Step 15
Place the Cloaking Strip to the
rear of one of the doors. Fixing in
position screwing through the door
into the cloaking strip with 3x30mm
screws.
Align the tower bolts onto the
vertical framing of the slave
door, secure the bolts to the
top and bottom using 6x30mm
black screws per tower bolt.
Mark the position of the bolt
& drill a hole above and below
for the bolt to catch in to.
Attach the door strips to the door
panel framing either side of the
door using 3x30mm screws per
strip.
16x30mm Black Screws
6x30mm Screws
23
15