P 15
Please retain product label and instructions for future reference
Fit the Cover Trims to the left
and right of the building and
over the panel joins as shown
in the illustration using 30mm
screws. Trim the length of the
cover trims to the required
size before fitting if necessary.
Pre drill to avoid splitting.
18x30mm Screws
Step 8
30mm
screw
Pre drill
hole
Step 9
12x40mm Screws
Attach the fascias to the roof
leaving a slight overhang at the
top.
Pre drill
hole
40mm
screw
14
Step 10
Use 4x30mm screws to fix
each beading strip onto the
door panel. Ensure that the
screw is parallel with the
door frame when fixing the
strip to the door panel as
shown in the close up view.
Line up the door block as
shown in the illustration.
Then fix with 2x30mm
screws by screwing through
the outside of the door into
the block.
10x30mm Screws
30mm
screw
17
12
Pre drill
hole