1
2
3
4
5
6
7
8
9 10
11
12
13
14
15
16
17
18
19
20
1
18
17
8
Pre drill
hole
30mm
screw
30mm
screw
50mm Screw x45
40mm Screw x18
Felt Tacks x106
20mm Screw x5
30mm Screw x162
30mm Black Screw x5
Nail Bag
*The door can be fitted to either
side of the building depending
on where you wish the storage
section to be located.
P 2
01MS0808SDFW-V1
Overall Dimensions:
Length = 2432mm
Width = 2484mm
Height = 2118mm
Base Dimensions:
Length = 2350mm
Width = 2360mm
Please retain product label and instructions for future reference
Before assembly
please make sure you have a
suitable base ready to erect your
building
MADE IN GREAT BRITAIN
Door Gable
Window Panel
Storage Door Panel
Internal Wall
Plain Gable
Floor QTY 2 Roof QTY 2
Door
Storage Door
QTY 2
Block - 132mm QTY 5
Ridge Bar - 2304mm
Eaves Frame - 1195mm QTY 4
Door Strip - 1590mm QTY 2
Cover Trim - 1575mm QTY 4
Fascia - 1333mm QTY 4
Finial QTY 2
T-Hinge QTY 7
Turn Button QTY 4
“L” Bracket QTY 2
Pad Bolt QTY 2
Pre Assembly
Before beginning assembly remove the transportation
blocks from the bottom of each panel.
Step 1
Lay the door gable flat and place the
door into the gap.
Fix the door into place with 3x T-hinges
securing using 7x30mm screws per
hinge.
Attach the turn buttons to the top &
bottom of the door gable with 2x 30mm
black screws, making sure the turn buttons
keep the door closed.
Secure the door strips to each side of the
door gap as shown in the illustration,
fixing into place using 4x30mm screws
per strip.
*Ensure to align the screws with the
framing on both the gable and door.
29x30mm Screws
2x30mm Black Screws
13
13
13
