Step 5
Lay the plain back panel and the remaining
gable top on a level floor place the gable
top on top of the plain back panel ensure
they are level at the top then fix together
using 60mm screws. Stagger the screws so
they do not collide.
8x60mm Screws
Pre drill
hole
60mm
screw
5
11
Step 6
Line the remaining Gable Strip up to the
assembled gable. Ensure the bottom of
the strip lines up with the underneath of
the plain back panel framing as shown in
the illustration and fix in place using 40mm
screws.
6x40mm Screws
Pre drill
hole
40mm
screw
a
a
P 4
For assistance please contact customer care on: 01636 880514
Mercia Garden Products Limited,
Sutton On Trent,
Newark,
Nottinghamshire,
NG23 6QN
www.merciagardenproducts.co.uk
Please retain product label and instructions for future reference
Pre drill
hole
Pre drill
hole
Step 7
Place the cover strip 13mm above
the gap in the window panel and
fix into place using 3x30mm screws.
*Measure and trim the strip before
fitting.
6x30mm Screws
If you would like the widows
to open attach the window to
the strip using 2x butt hinges.
Fix the hinges to the window
using 3x16mm screws per
hinge and to the strip with
3x30mm screws.
12x16mm Screws
12x30mm Screws
If you would like the window
to be fixed, secure the window
into the gap using 4x30mm
screws. Ensure to screw through
the window into the panel
framing.
8x30mm Screws
b
a
10
Opening Window
Fixed Window
30mm
screw
30mm
screw
16mm
screw
30mm
screw
22
16
Pre drill
hole
a
b
