Please retain product label and instructions for future reference
P 8
Step 16
Parts needed - No. 16 QTY 1
Screw the Pad Bolt
(No. 16)
on to the door
(No. 4)
and the retainer to the door panel
(No. 1)
using 10x30mm screws. Make
sure that you screw into the framing behind.
10x30mm Screws.
Pre drill
hole
30mm
screw
16
Step 17
Parts needed - No. 17 QTY 2
Fix the Turn Button
(No. 17)
onto the
Door Panel
(No. 1)
using 1x30mm
screw for each one.
*These turn buttons help to keep
your doors straight during high
and low levels of moisture content
in the air.*
2x30mm Screws
30mm
screw
Pre drill
hole
17
It is ESSENTIAL that you apply wood
treatment immediately after the building
has been assembled.
AFTER TREATMENT:
score around protective
cover on glazing and
carefuly peel
covering back
Summary of Contents for 01DTSHRAX0604SDNW-V1
Page 9: ...2 1 3 4...
Page 10: ...1 2...