9
Controls in detail
Telephone*
For a complete list of commands
(
컄
page 22).
“Telephone”
Use the command “Telephone” to activate
the telephone system. Use this command
if you want the digits you are entering to
appear on the COMAND display.
“Help Telephone”
The Voice Control System features a com-
prehensive help function.
Use the command “Help Telephone” and
the Voice Control System will read out an
option list of available functions and com-
mands that can be used in conjunction
with the telephone (
컄
page 27).
“Enter unlock code”
Use the command “Enter unlock code” to
input the code to unlock your telephone.
After speaking the command, you are
prompted to enter the code.
왘
Speak the code
앫
as a continuously spoken string of
digits, or
앫
in digit blocks of three to five digits.
Digits from “Zero” to “Nine” may be used.
After each digit block (separate the digit
blocks by using an approximately
0.5 second pause), the Voice Control Sys-
tem repeats the recognized digits and
waits until you continue speaking.
Sample dialog:
i
GSM phones only: If the incorrect unlock
code is entered three consecutive times, the
phone card is blocked. You can unblock the
phone card using the PUK (Personal Unblocking
Key) to unblock the card. The PUK can only be
entered using the keypad on your telephone (see
separate operating instructions for your cellular
telephone).
“Dial number”
You can dial a phone number using the
command “Dial number”.
Digits from “Zero” to “Nine” may be used.
The phone number must be spoken
앫
as a continuously spoken string of dig-
its
or
앫
in digit blocks (three to five digits in
each block).
After each digit block (separate the digit
blocks by using an approx. 0.5 second
pause), the Voice Control System repeats
the recognized digits and waits until you
continue speaking.
When dialing 1-800 numbers, you may pro-
nounce the first four digits as “One eight
hundred” and the system will recognize the
spoken entries as “One eight zero zero”.
All other numeric entries must be spoken
as individual numbers.
Telephone commands
s
Enter unlock code
t
Enter code
s
Zero zero one one
t
Zero zero one one
s
Save
