Mercedes-Benz V 200 4MATIC 2015, Operating Instructions Manual

Page: 93 / 360

Swivelling front seat (example: driver's seat)
:
Unlocks the swivelling seat
;
Seat fore-and-aft adjustment
The driver's seat and co-driver's seat can be
rotated by 50° and 180°.
The seats engage when facing in the direction of
travel as well as when facing in the opposite
direction and also engage at an angle of 50° to
the door.
X Adjust the steering wheel to provide the nec-
essary space to rotate and adjust the front
seat (
Y
page 109).
X
To turn the seat: push release handle
:
in
the direction of the arrow.
X
Turn the seat about 50° towards the outside
or inside to the desired position.
If there is a risk of collision with the centre
console or the B-pillar, pull lever
;
upwards
and move the seat forwards or back to the
desired position. Then release lever
;
again.
X
In the desired position, make sure that the
front seat has engaged.
The seat must not be able to be turned or
moved forwards or backwards.
Rear seats and rear bench seat
General notes
Your vehicle may be fitted with rear seats and/
or a rear bench seat or with a bench seat/berth.
For a variable configuration of the vehicle inte-
rior in the rear, you can:
Rear seats and rear bench seat
R
adjust the seat backrests (
Y
page 95)
R
move the rear seats (
Y
page 99) and rear
bench seat (
Y
page 95) forwards or back-
wards
R
fold each backrest forward individually to the
table position (
Y
page 99)
R
fold the rear seats (
Y
page 99) and rear
bench seat (
Y
page 96) forwards
R
remove the rear seats (
Y
page 101) and rear
bench seat (
Y
page 97) by releasing the
quick-locking mechanism
R
fit the rear seats and the rear bench seat in
the face-to-face position
Bench seat/berth
R
shift the bench seat/berth forwards and
backwards (
Y
page 102)
R
remove the bench seat/berth by releasing
the quick-locking mechanism (
Y
page 103)
R
set up the berth to accommodate two people
(
Y
page 105)
R
fold up or remove the bed extension of the
bench seat/berth (
Y
page 105)
Seat anchorage
G
WARNING
If a seat is not engaged, it may be thrown
about while the vehicle is moving. There is a
risk of an accident and injury.
Always make sure that all seats are engaged
as described.
G
WARNING
If the rear bench seat is not fully engaged, it
may be thrown about while the vehicle is mov-
ing. There is a risk of an accident and injury.
Always make sure that the rear bench seat is
fully engaged as described.
Example: seat rail system with quick-locking mech-
anism
Seats
91
Seats, steering wheel and mirrors
Z