Before driving off, always fold back the rear
bench seat if it is folded forward. Make sure
that the rear bench seat is fully engaged.
:
Backrest release handles
;
Release handles for rear seat anchorage
=
Grab handles
You can fold the rear bench seat fully forwards.
X
To fold down the seat backrest (table
position): pull backrest release handle
:
up
and fold forward.
i
The head restraints cannot be removed.
X
Pull release handles for rear seat anchor-
age
;
up and tilt the rear bench seat.
X
Grasp rear bench seat grab handles
=
and
fold the seat forwards.
Removing/fitting the rear bench seat
If the rear bench seat is not fully engaged, it
may be thrown about while the vehicle is mov-
ing. There is a risk of an accident and injury.
Always make sure that the rear bench seat is
fully engaged as described.
The only way to ensure that the rear bench seat
will engage securely is to always keep the
anchorages clean and free of foreign objects.
:
Backrest release handles
;
Release handles for rear seat anchorage
=
Grab handles
?
Release handle for front seat anchorages
A
Floor anchorages
i
Only carry out the release, removal and sub-
sequent replacement of the rear bench seats
at the basic position marked (
X
To remove: make sure that all carriages for
fore-and-aft adjustment are engaged on both
sides.
It should not be possible to move the rear
bench seat.
X
Fold the rear bench seat forwards
X
Pull release handle
?
upwards.
X
Hold the rear bench seat by grab handles
=
and lift it out of floor anchorages
A
.
X
To fit: hold the rear bench seat by grab han-
dles
=
and guide it into front floor ancho-
rages
A
at an angle from above.
Seats
97
Seats, steering wheel and mirrors
Z
Summary of Contents for V 200 4MATIC 2015
Page 1: ...V Class Operating Instructions...
Page 357: ...355...
Page 358: ...356...
Page 360: ...Order no 6463 7280 02 Part no 447 584 58 01 Z102 Edition 06 15 4475845801Z102H 4475845801Z102...
