47
USB (mp3 player)
General notes
In the case of mass storage devices with
built-in batteries, there can be function re-
strictions when the battery is completely
discharged.
Activating the mass storage device
1. Switch on the audio system and call up
the base menu "Disc". (Please refer to
the audio system operating instruc-
tions.)
2. With the CD menu active, switch first
of all into the AUX menu.
The last selected audio source is acti-
vated.
3. If necessary, change the audio source:
select
USB
.
The folder structure of the connected
mass storage device is displayed.
4. Select the file folder.
The stored audio file of the selected
folder are displayed in alphabetical or-
der.
5. Select an mp3 file from the list.
Playback is started. The play mode ap-
pears in the display.
Operation
Operation and the play mode are the same
as on the iPod
®
. (See page 43.)
G
Risk of accident
Only connect the mass storage device
when
the vehicle is at a standstill. Otherwise, there
is a risk that you could be distracted from
traffic conditions and cause an accident.
Note
Files stored in the formats .mp3 and .ogg
are displayed in the folder structure.
Playback is restricted to mp3 files.
Note
Up to 1000 audio files per file folder are
displayed.
Note
If the mass storage device is disconnect-
ed from the Universal Media Interface
during playback or playback is interrupt-
ed by switching to another audio source,
the current playback position of the se-
lected mp3 file is stored in the Universal
Media Interface. The next time the mass
storage device (with unchanged content)
is selected or the system is switched to
USB
, playback of the last selected mp3
file is continued automatically.
MBA_BA_book.book Seite 47 Montag, 19. Mai 2008 12:41 12
