Mercedes-Benz SLK 2014, Owner'S Manual

Page: 339 / 357

X
Mount the collapsible emergency spare
wheel as described (
Y
page 324).
The collapsible emergency spare wheel
must be mounted before it is inflated.
X
Pull plug ? out of the housing.
X
Take the air hose out of the housing.
X
Insert the yellow hose connector of the air
hose into the guide in the housing and push
it into the fixture until the hose connector
engages.
X
Remove the cap from the valve on the col-
lapsible emergency spare wheel.
X
Screw union nut : on the air hose onto the
valve.
X
Make sure on/off switch A of the tyre
inflation compressor is set to OFF.
X
Insert plug ? into the socket of the ciga-
rette lighter or into a 12 V of power socket
in your vehicle.
Observe the notes on the cigarette lighter
(
Y
page 268). Observe the notes on sock-
ets (
Y
page 269).
X
Turn the key to position 1 in the ignition
lock (
Y
page 141).
X
Press on/off switch A on the tyre inflation
compressor to ON.
The tyre inflation compressor is switched
on. The tyre is inflated. The tyre pressure is
shown on pressure gauge = .
X
Pump the tyre to the specified tyre pres-
sure.
The specified tyre pressure is printed on
the yellow label of the emergency spare
wheel.
X
When the specified tyre pressure has been
reached, press on/off switch A to OFF, on
the tyre inflation compressor.
The tyre inflation compressor is switched
off.
X
Turn the key to position 0 in the ignition
lock.
X
If the tyre pressure is higher than the speci-
fied pressure, press pressure release but-
ton ; until the correct tyre pressure has
been reached.
X
Unscrew union nut : on the air hose from
the valve.
X
Screw the valve cap onto the collapsible
emergency spare wheel valve again.
Removing an air hose
X
To remove the hose from the tyre inflation
compressor, push down the rocker switch
on the hose connector and pull out the
hose.
X
Stow plug ? and the air hose in the lower
section of the compressor housing.
X
Stow the tyre inflation compressor in the
vehicle.
336
Emergency spare wheel
Wheels
and
tyres