Climate control system
128
Function
Recommendation/Notes
c
Temperature control, driver’s side
i
Set the temperature to 72‡ (22†).
d
Ñ
Air distribution, driver’s side
Notes on climate control system
The climate control system is operational
whenever the engine is running. You can
operate the climate control system in either
the automatic or manual mode. The system
cools or heats the interior depending on the
selected interior temperature and the current
outside temperature.
It can only function optimally when you are
driving with the windows and the retractable
hardtop closed.
Nearly all dust particles, pollutants and odors
are filtered out before outside air enters the
passenger compartment through the air
distribution system.
Severe conditions (e.g. strong air pollution)
may require replacement of the filter before
its scheduled replacement interval. A
clogged filter will reduce the air volume to
the interior and the windows could fog up,
impairing visibility and endangering you
and others. Have a clogged filter replaced
as soon as possible at an authorized
Mercedes-Benz Center.
The air conditioning will not engage (no
cooling) if the
A/C mode (
deactivated.
Follow the recommended settings for
heating and cooling given on the following
pages. Otherwise the windows could fog
up, impairing visibility and endangering you
and others.
X
Keep the air intake grille in front of the
windshield free of snow and debris.
Do not obstruct air flow by placing objects on
the air flow-through exhaust slots below the
rear window.
i
If the vehicle interior is hot, ventilate the
interior before driving off. The climate
control will then adjust the interior
temperature to the set value much faster.
Deactivating the climate control
When the climate control system is
switched off, the outside air supply and
circulation are also switched off. Only
choose this setting for a short time when
the retractable hardtop is closed.
Otherwise the windows could fog up,
impairing visibility and endangering you
and others.
X
Deactivating: Press button
´
.
The indicator lamp in the button comes on.
X
Reactivating: Press button
´
.
The indicator lamp in the button goes out.
The previous settings are once again in
effect.
or
Controls in detail
230_AKB; 1; 42, en-US
d2ureepe,
Version: 2.11.7.1
2008-11-27T15:37:19+01:00 - Seite 128