Mercedes-Benz S350 TURBODIESEL Operator'S Manual Download Page 63

Page: 63 / 139

Storage Compartments in the

Dashboard

Storage/eyeglasses compartment

Button for storage/ eyeglasses

compartment

Glove box

Button for glove box

Lock

Storage /Eyeglass

Compartment

To open: Press button (2).

Glove Box

The glove box lid is equipped with a

container for coins and small accessories.

To open: Press button (4).

Note:

The storage compartments may be

locked and unlocked by using the master

key in lock (5).

Locking:

Turn master key in lock (5) to the

right and remove.

Unlocking:

Turn master key back to vertical

position.

Storage Compartments in the Door

Door pocket

To open:

Fold down cover.

Compartment for

compact umbrella.

Caution!

Keep compartment lids closed. This

will prevent stored objects from being

thrown about and injuring vehicle

occupants during an accident.

Summary of Contents for S350 TURBODIESEL












































































































































Search results

Summary of Contents for S350 TURBODIESEL

Reviews:

Related manuals for S350 TURBODIESEL

Brands by name

Popular brands

Mercedes-Benz S350 TURBODIESEL, Operator'S Manual

Search results

Summary of Contents for S350 TURBODIESEL

Reviews:

Related manuals for S350 TURBODIESEL

Brands by name

Popular brands