Mercedes-Benz S 350, Operator'S Manual

Page: 101 / 141

101
Replacing bulb:
When replacing halogen bulbs do not
touch glass portion of bulb with bare
hands. Use plain paper or a clean cloth.
Warning!
Halogen lamps contain pressurized
gas. A bulb can explode if you:
• touch or move it when hot,
• drop the bulb,
• scratch the bulb.
Bulb for low beam HB2 (60/55 W)
Bulb for fog lamp YC (H3) (55 W)
Open hood.
Depress latch (2) and remove cover (1).
Pull off electrical connector (8) or (9).
Unhook clamping ring (arrow) and
remove bulb.
Insert new bulb (seating properly in
cutouts of bulb socket), and mount
clamping ring. Reinstall and push
electrical connector on securely.
Reinstall bottom end of cover (1) and
push against top end of cover until
properly seated.
Check lamp for proper operation.
Bulb for high beam H1 (55 W)
Open hood.
Depress latch (4) and remove cover (3).
Pull off electrical connector (10).
Unhook clamping ring (arrow) and
remove bulb.
Insert new bulb (seating properly in
cutouts of bulb socket), and mount
clamping ring. Reinstall and push
electrical connector on securely.
Reinstall bottom end of cover (3) and
push against top end of cover until
properly seated.
Check lamp for proper operation.