Mercedes-Benz G 500 Operator'S Manual Download Page 272

Page: 272 / 376

272

Practical hints

What to do if …

Display symbol

Display message

Possible cause

Possible solution

ENGINE OIL LEVEL
REDUCE OIL LEVEL

You have added too much engine oil.
There is a risk of damaging the engine or
the catalytic converter.

왘

Have oil siphoned or drained off. Ob-
serve all legal requirements with re-
spect to its disposal.

ENGINE OIL LEVEL
STOP, ENGINE OFF!

There is no oil in the engine. There is a
danger of engine damage.

왘

Carefully bring the vehicle to a halt as
soon as possible.

왘

Turn off the engine.

왘

Add engine oil (

컄

page 231) and check

the engine oil level (

컄

page 229).

ENGINE OIL
VISIT WORKSHOP!

It may be that there is water in the engine
oil.

왘

Have the oil checked.

ENGINE OIL LEVEL
VISIT WORKSHOP!

The engine oil has dropped to a critical
level.

왘

Check the engine oil level
(

컄

page 229) and add oil as required

(

컄

page 231).

왘

If you must add engine oil frequently,
have the engine checked for possible
leaks.

The measuring system is malfunctioning.

왘

Have the measuring system checked
by an authorized Mercedes-Benz Light
Truck Center.

Summary of Contents for G 500

























































































































































































































































































































































































Search results

Summary of Contents for G 500

Reviews:

Related manuals for G 500

Brands by name

Popular brands

Mercedes-Benz G 500, Operator'S Manual

Search results

Summary of Contents for G 500

Reviews:

Related manuals for G 500

Brands by name

Popular brands