vehicle as a result of the adjustments being
made.
#
Only use the memory function on the
driver's side when the vehicle is station-
ary.
&
WARNING Risk of entrapment when
adjusting the seat with the memory func-
tion
When the memory function adjusts the seat,
you and other vehicle occupants – particularly
children – could become trapped.
#
During the adjustment process of the
memory function, make sure that no one
has any body parts in the sweep of the
seat.
#
If somebody becomes trapped, immedi-
ately release the memory function posi-
tion button.
The adjustment process is stopped.
&
WARNING Risk of entrapment if the mem-
ory function is activated by children
Children could become trapped if they activate
the memory function, particularly when unat-
tended.
#
Never leave children unattended in the
vehicle.
#
When leaving the vehicle, always take the
key with you and lock the vehicle.
The memory function can be used when the vehi-
cle is switched off.
*
NOTE Damage to the seat when moving
into a stored position
If the seat is moved out of the fully reclined
position into a stored seat position, it can col-
lide with other vehicle parts.
This can damage the seat.
#
Before moving the seat into a stored
position, move the seat backrest into an
upright position.
Storing seat settings
Seat settings for up to three people can be stored
and called up using the memory function.
The following settings are stored as a single mem-
ory preset:
R
the position of the seat, seat backrest and
head restraint
R
additionally for the driver's side, the position of
both exterior mirrors
#
Adjust the seat to the desired position.
#
Adjust the exterior mirror to the desired posi-
tion.
#
Briefly press memory button
V
and then
press preset position button
4
,
T
or
U
within three seconds.
An acoustic signal sounds. The settings are
stored.
#
To call up: press and hold preset position but-
ton
4
,
T
or
U
until the seat and the
exterior mirrors are in the stored position.
Rotating the front seats
&
WARNING Risk of injury or fatal injuries
due to the driver's seat and front
passenger seat not being engaged
In this situation, the restraint systems cannot
perform their intended protective function.
#
Engage the driver's seat and front
passenger seat in the direction of travel
before you start the drive system.
*
NOTE Damage to the seats due to colliding
with adjacent car parts
When you rotate the seats, they may collide
with adjacent car parts.
This can damage the seats.
74
Seats and stowage
T447 0414 02
Summary of Contents for EQV 2021
Page 1: ...EQV Owner s Manual T447 0414 02 ...
Page 7: ...T447 0414 02 ...
