Mercedes-Benz EQS 350, Operator'S Manual

Page: 516 / 581

Display messages Possible causes/consequences and
M
Solutions
Change steering wheel/
seat position until 6 dots
are visible on the upper
edge of the screen
* The driver camera cannot capture your line of sight.
#
Change the steering wheel and seat position until six dots are visible on the top edge of the screen.
The display message will appear again if the driver camera is again unable to detect your line of sight after
30 minutes.
The display message will no longer appear if you confirm the display message and the driver camera cannot detect
your line of sight during the entire journey.
Driver camera inoperative
See Owner's Manual
* The driver camera is malfunctioning.
#
Consult a qualified specialist workshop.
ä
Fault Drive at max. 80
km/h
* AIRMATIC is functioning only to a limited extent. The vehicle's handling characteristics may be affected.
*
NOTE The tyres on the front axle or the fenders could be damaged by large steering movements
#
Avoid large steering movements while driving and listen for scraping sounds.
#
If you hear scraping sounds, pull over and stop the vehicle in accordance with the traffic conditions, and set a
higher vehicle level if possible.
#
Drive in a manner appropriate for the current level, but do not exceed 80 km/h.
#
Consult a qualified specialist workshop.
Display messages and warning/indicator lamps 513