#
Press button
1
repeatedly until the desired
heating level is set.
Depending on the heating level, up to three
indicator lamps will light up. If all indicator
lamps are off, the seat heating is switched off.
%
The seat heating will automatically switch
down from the three heating levels after 8, 10
and 20 minutes until the seat heating
switches off.
%
If you switch the power supply off and on
again within 20 minutes, the previous setting
of the seat heating for the driver's seat will
remain active.
%
You can set the heat distribution of the heated
sections among the seat cushions and seat
backrests on the front and rear seats using
the multimedia system (
/
page 125).
Switching the seat ventilation on/off
Requirements:
R
The power supply is switched on.
128 Seats and stowing
Summary of Contents for EQS 350
