Mercedes-Benz EQS 2021, Operator'S Manual

Page: 670 / 928

#
Position support 2 of jack 4 on jack sup-
port point 1 .
#
Turn ratchet 3 clockwise until support 2
sits completely on jack support point 1 and
the base of the jack lies evenly on the ground.
#
Turn ratchet 3 until the tyre is raised a maxi-
mum of 3 cm from the ground.
#
Loosen and remove the wheel (
/
page 668).
Removing a wheel
Requirements:
R
The vehicle is raised.
Note on AMG vehicles:
* NOTE Damage to the ceramic brake disc
when changing a wheel
Mercedes-AMG vehicles with ceramic brake
discs: during removal and repositioning of the
wheel, the wheel rim can strike the ceramic-
brake disc and damage it.
#
Take particular care.
#
Ask another person for assistance or use
a second centring pin.
When changing a wheel, avoid applying any force
to the brake discs, as this could impair the level of
comfort when braking.
* NOTE Damage to the wheels' plastic ele-
ments when changing a wheel
Plastic elements on wheels may be damaged
when removing and repositioning the wheel.
#
Do not raise the wheels by the plastic
elements when removing and reposition-
ing.
*
NOTE Damage to threading from dirt on
wheel bolts
#
Do not place wheel bolts in sand or on a
dirty surface.
#
Unscrew the uppermost wheel bolt com-
pletely.
668 Wheels and tyres
ohne