%
Depending on the vehicle's equipment, button
1
may also be located at a different position
in the centre console.
#
Press button
1
.
The
Camera & parking
view opens in the cen-
tral display.
#
Select the
Memory Parking Assist
menu
2
.
#
Brake the vehicle to a standstill at the starting
point of the stored parking procedure.
#
To start the parking procedure: press
6
.
#
Select the stored parking procedure from the
list.
#
Follow the instructions on the central display.
The vehicle drives into the selected parking
space.
%
The turn signal indicator is not switched on
automatically. You are responsible for select-
ing the turn signal indicator in accordance
with the traffic conditions.
#
After completion of the parking procedure,
safeguard the vehicle against rolling away.
▌
Exiting a parking space with Memory Parking
Assist
Requirements:
R
The exiting procedure was recorded together
with the respective parking procedure and
stored separately within one driving cycle.
R
The vehicle was parked using Memory Parking
Assist.
Driving and parking 399
ohne
Summary of Contents for EQS 2021
