ments placed on the seats e.g. seat cushions
or child seats. This could cause damage to the
seat surface.
#
Make sure that no objects or documents
are on the seats when the seat heater is
switched on.
Requirements:
R
The power supply is switched on.
#
Press button
1
repeatedly until the desired
heating level is set.
Depending on the heating level, up to three
indicator lamps will light up. If all indicator
lamps are off, the seat heating is switched off.
%
The seat heating will automatically switch
down from the three heating levels after 8, 10
and 20 minutes until the seat heating
switches off.
%
If you switch the power supply off and on
again within 20 minutes, the previous setting
of the seat heating for the driver's seat will
remain active.
%
You can set the heat distribution of the heated
sections among the seat cushions and seat
backrests on the front and rear seats using
the multimedia system (
/
page 180).
Switching the seat ventilation on/off
Requirements:
R
The power supply is switched on.
Seats and stowing 183
ohne
Summary of Contents for EQS 2021
