Mercedes-Benz EQA 2022, Owner'S Manual

Page: 367 / 541

At a distance of approximately 1 m to the tyre
inflation compressor and approximately 1.6 m
above the ground, the following sound pres-
sure levels apply:
R
Emission sound pressure level L
PA
83 dB
(A)
R
Sound power level L
WA
91 dB (A)
The tyre inflation compressor is maintenance-
free. If there is a malfunction, please contact
a qualified specialist workshop.
TIREFIT kit storage location
The TIREFIT kit is located under the load compart-
ment floor on the right-hand side.
%
You can find information on the power cate-
gory (LK) and/or electrical data on the back
of the tyre inflation compressor:
R
LK2 – 12 V/15 A, 180 W, 0.8 kg
At a distance of approximately 1 m to the tyre
inflation compressor and approximately 1.6 m
above the ground, the following sound pres-
sure levels apply:
R
Emission sound pressure level L
PA
83 dB(A)
R
Sound power level L
WA
91 dB(A)
The tyre inflation compressor is maintenance-
free. If there is a malfunction, please contact
a qualified specialist workshop.
Using the TIREFIT kit
Required tools:
R
Tyre sealant bottle
R
TIREFIT sticker
R
Sticker with details of the maximum permissi-
ble speed
R
Tyre inflation compressor
R
Gloves
TIREFIT kit storage location: (
/
page 364, 363)
You can use TIREFIT tyre sealant to seal perfora-
tion damage of up to 4 mm, particularly those in
the tyre contact surface. You can use TIREFIT in
outside temperatures down to -20 °C.
&
WARNING Risk of accident when using
tyre sealant
The tyre sealant may be unable to seal the
tyre properly, especially in the following cases:
R
there are large cuts or punctures in the
tyre (larger than damage previously men-
tioned)
R
the wheel rims have been damaged
R
after journeys with very low tyre pressure
or with flat tyres
#
Do not continue driving.
#
Consult a qualified specialist workshop.
&
WARNING Risk of injury and poisoning
from tyre sealant
Tyre sealant is hazardous to health and causes
irritation. Do not allow it to come into contact
364 Breakdown assistance