Mercedes-Benz E 450 4MATIC 2019, Operator'S Manual

Page: 134 / 518

#
To switch on the power supply: press but‐
ton 1 once.
You can activate the windshield wipers, for
example.
The power supply is switched off again if the fol‐
lowing conditions are met:
R
You open the driver's door
R
You press button 1 twice.
#
To switch on the ignition: press button 1
twice.
The indicator lamps in the instrument cluster
light up.
The ignition is switched off again if one of the
following conditions is met:
R
Vehicles with automatic transmission:
you do not start the vehicle within
15 minutes and the transmission is in posi‐
tion j or the electric parking brake is
applied.
R
You press button 1 once.
Starting the vehicle
Starting the vehicle with the start/stop but‐
ton
Requirements:
R
The SmartKey is in the vehicle and is recog‐
nized.
#
Shift the transmission to position j or i .
#
Depress the brake pedal and press button
1 once.
#
If the vehicle does not start: switch off non-
essential consumers and press button 1
once.
#
If the vehicle still does not start and the
Place the Key in the Marked Space See
Operator's Manual display message also
appears in the multifunction display: start
the vehicle in emergency operation mode.
You can switch off the engine while driving by
pressing button 1 for about three seconds or
by pressing button 1 three times within a sec‐
ond. Be sure to observe the safety notes under
"Driving tips".
Starting the vehicle in emergency operation
mode
If the vehicle does not start and the Place the
Key in the Marked Space See Operator's Manual
message appears in the multifunction display,
you can start the vehicle in emergency operation
mode.
132 Driving and parking