Mercedes-Benz E 400 HYBRID 2014, Supplemental Operating Instructions

Page: 48 / 52

Useful information
i
This Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differences are
possible. Please note that your vehicle may
not be equipped with all features
described. This also applies to safety-
related systems and functions.
i
Read the information on qualified
specialist workshops: (
Y
page 7).
Information on the technical data
i
The data stated here specifically refers to
a vehicle with standard equipment. Consult
an authorized Mercedes-Benz Center for
the data for all vehicle variants and trim
levels.
Service products and filling
capacities
Engine oil
Points to remember
Only engine oils approved by Mercedes-Benz
may be used in Mercedes-Benz engines (for
further information see the vehicle
Operator's Manual).
Model Engine
model
MB
Approval
E 400 HYBRID 276 229.5
Filling capacities
The following values refer to an oil change
including the oil filter.
Engine with oil filter
Capacity 6.9 US qt (6.5 l)
Climate control system refrigerant
Important safety notes
!
Only the refrigerant R-134a and the PAG
oil approved by Mercedes-Benz may be
used. The approved PAG oil may not be
mixed with any other PAG oil that is not
approved for R-134a refrigerant.
Otherwise, the climate control system may
be damaged.
Service work, such as topping-up refrigerant
or replacing components, may only be carried
out by a qualified specialist workshop. All
applicable regulations must be adhered to,
SAE standard J639 included.
Always have work on the climate control
system carried out at a qualified specialist
workshop.
Refrigerant instruction label
Example: refrigerant instruction label
:
Warning symbol
;
Refrigerant filling capacity
=
Applicable SAE standards
?
PAG oil part number
A
Type of refrigerant
Warning symbols : indicate:
R
possible dangers
R
that it is necessary to have maintenance
work carried out at a qualified specialist
workshop
46
Service products and filling capacities
Technical
data