#
Guide upper anchorage strap downwards
between luggage compartment cover
1
and
rear seat backrest
2
.
#
Securely fasten the attachment clip, which is
part of the upper anchorage strap, to the
upper anchor fitting
4
.
Ensure that:
R
Upper anchor attachment is securely fas‐
tened to the upper anchor fitting
4
.
R
Upper anchorage strap is not twisted.
R
Upper anchorage strap is routed between
rear seat backrest
2
and luggage compart‐
ment cover
1
if luggage compartment cover
1
is fitted.
R
Upper anchorage strap is routed between the
rear seat backrest
2
and the safety net if
the safety net is fitted.
#
Tension upper anchorage strap. Comply with
the manufacturer's installation instructions
when doing so.
#
Move head restraint
3
back down again
slightly if necessary. Make sure that you do
not interfere with the correct routing of
upper anchorage strap.
V-Class/Valente/Vito
The upper anchorage points of the single seat, 2-
seater bench or 3-seater bench are each located
on the rear side at the bases of the seat.
Single seat (example)
#
Move head restraint
1
upwards.
#
For an upper anchorage strap with one belt
strap, route the upper anchorage strap under
the head restraint
1
between the two head
restraint bars.
#
For an upper anchorage strap with two belt
straps, route the upper anchorage strap on
the left and right past the side of the head
restraint
1
.
#
Securely fasten the attachment clip, which is
part of the upper anchorage strap, to the
upper anchor fitting
2
.
Ensure that:
R
Upper anchor attachment is securely fas‐
tened to the upper anchor fitting
2
.
R
Upper anchorage strap is not twisted.
#
Tension upper anchorage strap. Comply with
the manufacturer's installation instructions
when doing so.
#
Move head restraint
1
back down again
slightly if necessary. Make sure that you do
not interfere with the correct routing of
upper anchorage strap.
Changes as compared to the Owner's Manual
21