activated, the
À
symbol appears in the
multifunction display when the ignition is on.
Activating/deactivating Active Blind
You can use the
Blind Spot Assist
function to activate or deactivate Active Blind
Spot Assist (
X
Press
=
or
;
on the steering wheel
to select the
DriveAssist
menu.
X
Press
9
or
:
to select
Blind Spot
Assist
.
X
Press
a
.
The current selection is displayed.
X
To activate/deactivate: press
a
again.
Activating/deactivating Active Lane
You can use the
Lane Keeping Assist
function to activate or deactivate Active Lane
Keeping Assist (
X
Press the
=
or
;
button on the
steering wheel to select the
DriveAssist
menu.
X
Press the
9
or
:
button to select
Lane Keeping Assist
.
X
Press
a
.
The current selection is displayed.
X
To activate/deactivate: press
a
again.
If Active Lane Keeping Assist is activated, the
Ã
symbol appears in the multifunction
display when the ignition is on.
In the
Service
menu you can:
R
R
check the tire pressure electronically
(
R
call up the service due date (
R
Settings menu
The
Settings
menu can be used for:
R
switching the daytime running lamps on/
off
R
switching Adaptive Highbeam Assist on/
off
R
showing or hiding the additional
speedometer
R
selecting the units for speed and distance
R
activating/deactivating the radar sensor
system
Switching the daytime running lamps
This function is not available in Canada.
If you have activated the
Daytime Running
Light
function and the light switch is in the
$
or
c
position, the daytime running
lamps are switched on automatically when
the engine is running.
In the dark, the following also light up:
R
the parking lamps
R
the tail lamps
R
the license plate lamp
R
the side marker lamps
If you turn the light switch to a different
position, the corresponding lights are
switched on. If you switch off the daytime
running lamps at night, make sure that the
light switch is set to
L
or
c
.
The factory setting is
On
.
X
Press the
=
or
;
button on the
steering wheel to select the
Settings
menu.
X
Press the
9
or
:
button to select
Day Running Lights
.
Menus and submenus
343
On-board computer and displays
Z
Summary of Contents for CL2012
