X
Press the
=
or
;
button on the
steering wheel to select the
DriveAssist
menu.
X
Press the
9
or
:
button to select
Distance Display
.
X
Press
a
.
The DISTRONIC PLUS distance display
(
page 299) appears in the multifunction
display.
Under no circumstances should you
deactivate ESP
®
when the
÷
ESP
®
warning lamp in the instrument cluster
flashes. Proceed as follows:
R
when driving off, apply as little throttle as
possible.
R
while driving, ease up on the accelerator
pedal.
R
adapt your speed to suit the prevailing road
and weather conditions.
Failure to observe these guidelines could
cause the vehicle to skid. ESP
®
cannot
prevent accidents resulting from excessive
speed.
For further information about ESP
®
, see
X
Start the engine.
X
Press
=
or
;
on the steering wheel
to select the
DriveAssist
menu.
X
Press the
9
or
:
button to select
ESP
.
X
Press the
a
button.
X
To deactivate: press
a
again.
The
å
warning lamp in the instrument
cluster comes on.
When the
å
ESP
®
OFF warning lamp is lit,
ESP
®
is deactivated.
If the
÷
ESP
®
warning lamp and the
å
ESP
®
OFF warning lamp remain lit,
ESP
®
is not available due to a malfunction.
When ESP
®
is deactivated or not operational,
vehicle stability in standard driving
maneuvers is reduced.
Adapt your speed and driving to the prevailing
road conditions and to the non-operating
status of the ESP
®
.
X
To activate: press
a
again.
The
å
warning lamp in the instrument
cluster goes out.
Activating/deactivating PRE-SAFE
PRE-SAFE
®
Brake is only available in vehicles
with DISTRONIC PLUS.
X
Press the
=
or
;
button on the
steering wheel to select the
DriveAssist
menu.
X
Press
9
or
:
to select
PRE-SAFE
Brake
.
X
Press
a
.
The current selection is displayed.
X
To activate/deactivate: press
a
again.
When PRE-SAFE
®
activated, the multifunction display shows
the
Ä
symbol as long as the HOLD
function is not activated (
Activating/deactivating ATTENTION
X
Press the
=
or
;
button on the
steering wheel to select the
DriveAssist
menu.
X
Press the
9
or
:
button to select
Attention Assist
.
X
Press
a
.
The current selection is displayed.
X
To activate/deactivate: press
a
again.
342
Menus and submenus
On-board computer and displays
Summary of Contents for CL2012
