Making adjustments in 1 mph (Canada:
X
Briefly press the cruise control lever to the
pressure point, up
:
for a higher speed or
down
;
for a lower speed.
The last speed stored is increased or
reduced.
Making adjustments in 5 mph (Canada:
X
Briefly press the cruise control lever
beyond the pressure point, up
:
for a
higher speed or down
;
for a lower speed.
The last speed stored is increased or
reduced.
Storing the current speed or calling up
The set speed stored in memory should only
be set again if prevailing road conditions and
legal speed limits permit. Possible
acceleration or deceleration differences
arising from returning to the preset speed
could cause an accident and/or serious injury
to you and others.
X
Briefly pull the cruise control lever towards
you
?
.
X
Remove your foot from the accelerator
pedal.
DISTRONIC PLUS is activated. The first
time it is activated, the current speed is
stored. Otherwise, it sets the vehicle cruise
speed to the previously stored value.
Setting the specified minimum distance
You can set the specified minimum distance
for DISTRONIC PLUS by varying the time span
between one and two seconds. With this
function, you can set the minimum distance
that DISTRONIC PLUS keeps to the vehicle in
front, dependent on vehicle speed. You can
see this distance in the multifunction display
(
It is up to the driver to exercise discretion to
select the appropriate setting given road
conditions, traffic, driver's preferred driving
style and applicable laws and driving
recommendations for safe following distance.
X
To increase: turn control
;
in direction
=
.
DISTRONIC PLUS then maintains a greater
distance between your vehicle and the
vehicle in front.
X
To decrease: turn control
;
in
direction
:
.
DISTRONIC PLUS then maintains a shorter
distance between your vehicle and the
vehicle in front.
i
Make sure that you maintain a sufficient
and safe distance from the vehicle in front.
Adjust the distance to the vehicle in front if
necessary.
298
Driving systems
Driving and parking
Summary of Contents for CL2012
