Mercedes-Benz CL2012, Operator'S Manual

Page: 224 / 488

X
In a directory, press the corresponding
number key once or several times to select
the first letter of the artist's name (e.g. for
an artist beginning with the letter "C", press
number key
l
three times).
The available letters are listed at the lower
edge of the display.
If the directory only contains folders,
COMAND searches for folders. After a
message, the first entry which matches the
letter entered is shown at the top of the list.
If no entry matches the entered letter, the
first item in the list is the last entry to
correspond to a selection.
Selecting an active partition (USB mass
storage devices only)
You can select this function for USB mass
storage devices when the storage device is
partitioned. Up to four partitions (primary or
logical; FAT format) are supported.
i The Windows formatting program
supports FAT partitioning up to 32 GB as
standard.
X Select
Media Interface
in the basic
display by sliding
V Æ
and turning
cVd
the
COMAND controller and press
W
to
confirm.
X
Select Select Active Partition and
press
W
to confirm.
Playback options
The following options are available:
R
Normal Track Sequence
Normal track sequence: you hear the
tracks in their normal order (e.g. numerical
or alphabetical).
R
Random Tracks
All the tracks on the medium are played in
random order.
R
Category Mix
or
Random Folder
(for USB
devices if
Folder
has been selected)
The tracks in the currently active category
or folder, including any subfolders, are
played in random order.
i For USB devices, the random playlists
offer a maximum of 300 tracks chosen at
random.
X
To select a playback option: select
Media Interface in the basic display by
sliding
V Æ
and turning
cVd
the COMAND
controller and press
W
to confirm.
The options list appears. The
#
dot
indicates the option selected.
X
Select an option and press
W
to confirm.
Separate USB connection
In addition to the USB connection on the
Media Interface, there is another USB
connection in the glove box. This connection
can also be used to play audio files.
Electrical consumption at this connection
must not exceed a continuous current of
500 mA. If the electrical consumption is
higher, use a separate source to provide
power for the USB device (e.g.
12 V power supply).
X
To select music from the USB port as
the audio source: select
Audio
by sliding
ZV
and turning
cVd
the COMAND
controller and press
W
to confirm.
The audio menu appears.
X
Select USB and press
W
to confirm.
Notes on USB devices
Data formats
The following data formats are supported:
R
MP3: CBR, VBR (up to 320 kbit/s)
R
WMA: CBR, VBR (up to 320 kbit/s)
222
Audio
COMAND