Mercedes-Benz CL2012, Operator'S Manual

Page: 116 / 488

switch SPLITVIEW on and off
(
Y
page 115).
The SPLITVIEW screen remains on for
approximately 30 minutes after the SmartKey
has been turned to position
0 in the ignition
lock. After this time or after the SmartKey has
been removed, the settings on the front-
passenger side are saved for approximately
30 minutes longer. After this period,
reactivation on the front-passenger side
means that the settings from the driver's side
will be used.
Swiveling the COMAND display and
setting the brightness
You can swivel the COMAND display
4
. The
buttons are located beside the COMAND
display.
Swiveling
:
To swivel the display to the left
;
To swivel the display to the right
Setting the brightness
:
Brightness of the instrument cluster
lighting
;
Brightness of the COMAND display
Brighter or dimmer:
X
Turn control
:
or
;
clockwise or counter-
clockwise.
i If Night View Assist Plus is activated, only
the brightness of the multifunction display
is adjusted with control
:
.
Display design
When the default settings are selected, the
display automatically switches between day
design and night design.
You can change these settings using
COMAND (
Y
page 127).
Cleaning instructions
! Do not touch the COMAND display. The
display has a very sensitive high-gloss
surface; there is a risk of scratching. If you
have to clean the screen, however, use a
mild cleaning agent and a soft, lint-free
cloth.
The display must be switched off and have
cooled down before you start cleaning. Clean
the display screen, when necessary, with a
commercially available microfiber cloth and
cleaning agent for TFT/LCD displays. Then,
dry the surface with a dry microfiber cloth.
4 Not with SPLITVIEW.
114
At a glance
COMAND