manualshive.com logo in svg

Mercedes-Benz B-Class F-CELL, Operator'S Manual

The Mercedes-Benz B-Class F-CELL Operator's Manual is a comprehensive and essential guide for owners of this innovative fuel cell vehicle. Easily download the manual for free from our website, providing you with all the necessary instructions and insights to fully enjoy and operate this state-of-the-art vehicle.

Share
Download
background image

inflation pressure that follows applies to that
particular tire size only.

i

Data shown on tire inflation pressure

label examples are for illustration purposes
only. Tire inflation pressure data are
specific to each vehicle and may vary from
data shown in the following illustrations.
Refer to the tire inflation pressure label on
vehicle for actual data specific to your
vehicle.

Example illustration: Tire inflation pressures for all

approved, factory equipped tires

When a tire size is specified, the tire inflation
pressure that follows applies to that
particular tire size only.

Example illustration: Tire inflation pressures for

particular tire sizes

Some tire inflation pressure labels may only
show the rim diameter instead of the entire
tire size, e.g. 

R 18 or 18".

The rim diameter is part of the tire size as
specified on the tire sidewall (

Y

 page 296).

Example illustration: Tire inflation pressures

specific to rim diameter

Potential problems associated with 

underinflated and overinflated tires 

Underinflated tires

G

Warning!

Follow recommended tire inflation pressures.
Do not underinflate tires. Underinflated tires
wear excessively and/or unevenly, adversely
affect handling and fuel economy, and are
more likely to fail from being overheated.

Underinflated tires can

R

cause excessive and uneven tire wear

R

adversely affect fuel economy

R

lead to tire failure from being overheated

R

adversely affect handling characteristics

Overinflated tires

G

Warning!

Follow recommended tire inflation pressures.
Do not overinflate tires. Overinflated tires can
adversely affect handling and ride comfort,
wear unevenly, increase stopping distance,
and result in sudden deflation (blowout)
because they are more likely to become
punctured or damaged by road debris,
potholes etc.

Overinflated tires can

R

adversely affect handling characteristics

R

cause uneven tire wear

Tires and wheels

283

Operation

245_AKB; 1; 73, en-US
d2ureepe,

Version: 2.11.8.1

2009-09-03T15:03:17+02:00 - Seite 283

Z

Summary of Contents for B-Class F-CELL

















































































































































































































































































































































































Reviews:

No comments

Related manuals for B-Class F-CELL

Ford FOCUS RS 2018 Owner'S Manual Supplement preview
FOCUS RS 2018
Brand: Ford Pages: 52
Monacor CARPOWER CAP-12XHQ Manual preview
CARPOWER CAP-12XHQ
Brand: Monacor Pages: 5
Jeep Grand Cherokee WK2 Owner'S Manual preview
Grand Cherokee WK2
Brand: Jeep Pages: 338
Yakima K831 Manual preview
K831
Brand: Yakima Pages: 8
EZTRUNK PHANTOM JK Assembly Manual preview
PHANTOM JK
Brand: EZTRUNK Pages: 3
Cadillac 1997 Catera Owner Assistance Information preview
1997 Catera
Brand: Cadillac Pages: 34
Westin 22-1065 Instructions preview
22-1065
Brand: Westin Pages: 3
Saab 2006 9-5 Owner'S Manual preview
2006 9-5
Brand: Saab Pages: 288
AD Boivin ZX2 2008 Adjustment Manual preview
ZX2 2008
Brand: AD Boivin Pages: 37
Ford 2006 F-250 Owner'S Manual preview
2006 F-250
Brand: Ford Pages: 312
Boyo VTSR100 User Manual preview
VTSR100
Brand: Boyo Pages: 2
Cadillac 1967 Calais Coupe Data Book preview
1967 Calais Coupe
Brand: Cadillac Pages: 255
NavLinkz RL4-MIB3-E Manual preview
RL4-MIB3-E
Brand: NavLinkz Pages: 24
Ratio Electric HOME BOX SMART Manual preview
HOME BOX SMART
Brand: Ratio Electric Pages: 16
Volkswagen RCD550 Installation Manual preview
RCD550
Brand: Volkswagen Pages: 4
Mitsubishi 2015 OUTLANDER SPORT/RVR Owner'S Manual preview
2015 OUTLANDER SPORT/RVR
Brand: Mitsubishi Pages: 384
Lance 1130 Owner'S Manual preview
1130
Brand: Lance Pages: 132
Hendrickson PRIMAAX Technical Procedures preview
PRIMAAX
Brand: Hendrickson Pages: 60

Brands by name

Popular brands

Load more brands