Electrical system
Body
31
The New Zetros, Introduction into Service Manual for Model Series 949
i
The electrical system of the Zetros is based on that
of the Atego/Axor model. It is a 24 V electrical
system with a negative terminal-grounded basic
circuit.
The Telligent
®
maintenance system allows mainte-
nance intervals to be managed according to vehicle
usage.
The Mercedes-Benz FleetBoard
®
telematics plat-
form can be retrofitted.
The electrical system is protected by the following
measures:
• Splash-proof lines
• Fused individual circuits (melting fuses)
• Circuit breakers (special equipment)
The following equipment is supplied as standard for
military versions:
• Stealth lights
• Jump-start socket
• Nato gel battery
• Trailer sockets as per VG-Norm
• Electrical system for hazardous goods transport
• Electrical system suitable for fording, for fording
depths of 800, 1,195 and 1,500 mm depending
on equipment variant
Battery
The battery is located in the battery box on the left-
hand side of the vehicle under the cab. The jump-
start socket is located on the battery box and, on
military versions, the battery main switch is also
located here.
W54.10-1073-00
1
Battery box
X127 Jump-start socket
Trailer socket
The trailer sockets are located in the area of the
trailer hitch on the crossmember. On military
versions, there is an additional 12-pin socket as per
VG-Norm on the left next to the convoy marking.
W31.19-1027-00
X11
Trailer socket (15-pin)
X12.8 ABS trailer socket (7-pin) NATO
– This printout will not be recorded by the update service. Status: 10 / 2008 –
