Mercedes-Benz 600 SEL 1993, Owner'S Manual

Page: 40 / 149

F Memory button
G Position buttons
Storing seat/head restraint/
steering w heel/exterior and inside
rear view mirror positions in
memory:
Three sets of seat/head restraint/
steering w heel/exterior and inside
rear view mirror positions may be
programmed into memory. After
the seat/head restraint/steering
wheel/exterior and inside rear
view mirrors are positioned, push
memory button F, release, and
within 3 seconds push position
button ” 1” . A second and third set
of positions for the same seat/
head restraint/steering w heel/
exterior and inside rear view
mirrors can be programmed into
memory by pushing first button
” F” and then ” 2 ” , respectively
” 3 ” .
Note:
See Index for instructions on
adjustment of steering wheel and
mirrors.
Recalling seat/head restraint/
steering wheel/exterior and inside
rear view mirror positions stored in
memory:
To recall a seat/head restraint/
steering wheel/exterior and inside
rear view mirror position, push and
hold position button ” 1” , ” 2” or
” 3 ” until seat/head restraint/
steering w heel/exterior and inside
rear view mirror movement has
stopped. The seat/head restraint/
steering wheel/exterior and inside
rear view mirror movement stops
when the position button is
released.
Caution!
Do not remove head restraints
except when mounting seat cov­
ers. For removal and installation
refer to
Head Restraints, Removal
in Index. Whenever restraints have
been removed be sure to reinstall
them before driving.
38