Mercedes-Benz 500 SEC, Operator'S Manual

Page: 38 / 145

38
F Memory button
G Position buttons
Storing seat/head restraint/ steering
wheel/exterior and inside rear view
mirror positions in memory:
Three sets of seat/head restraint/
steering wheel/exterior and inside rear
view mirror positions may be
programmed into memory. After the
seat/head restraint/steering
wheel/exterior and inside rear view
mirrors are positioned, push memory
button F, release, and within 3 seconds
push position button "1". A second and
third set of positions for the same
seat/ head restraint/steering wheel/
exterior and inside rear view mirrors
can be programmed into memory by
pushing first button "F" and then "2",
respectively "3".
Note:
See Index for instructions on
adjustment of steering wheel and
mirrors.
Recalling seat/head restraint/ steering
wheel/exterior and inside rear view
mirror positions stored in memory:
To recall a seat/head restraint/
steering wheel/exterior and inside rear
view mirror position, push and hold
position button "1", "2" or "3" until
seat/head restraint/ steering
wheel/exterior and inside rear view
mirror movement has stopped. The
seat/head restraint/ steering
wheel/exterior and inside rear view
mirror movement stops when the
position button is released.
Caution!
Do not remove head restraints except
when mounting seat covers. For
removal and installation refer to Head
Restraints, Removal in Index.
Whenever restraints have been
removed be sure to reinstall them
before driving.