Mercedes-Benz 380 SE 1984, Owner'S Manual

Page: 77 / 105

Replacing bulbs:
Bulbs for turn signal, standing, side
marker and parking lamps
(21/5 W/32/3 cp):
Turn lamp holder with bulb to the left
and remove. Depress bulb, turn to
the left and take out.
Sealed-beam unit for high and low
beam (Sealed-beam/Halogen):
Loosen securing screw (5) and pull
housing out of bracket. Then loosen
securing screws (6) and remove
front cover. Remove securing
screws (8) from retaining frame and
take out sealed-beam unit. Pull off
connector.
380 SE, 500 SEL:
Bulb for fog lamp (H 3):
Loosen securing screw (5) and pull
housing out of bracket. Then loosen
securing screws (6) and remove
front cover. Remove securing
screws (10) and take out lamp
holder. Pull off plug connector (12).
Disengage retaining spring (13) and
take out bulb.
Fog Lamp 500 SEC
The bulb for the fog lamp is acces­
sible through the wheel well for the
purpose of bulb replacement.
1 Vertical adjustment screw for the
fog lamp
2 Horizontal adjustment screw for
the fog lamp
QEEH FOP
Electrical System
Bulb for fog lamp (H 3):
Unsnap the bottom of protective
cap and remove towards the top.
Loosen clip (3) and remove
cover.
Unplug electric connector (5).
Unhook retaining spring and
remove bulb.
75