Seats
Arm Rest
(Rear Seat)
An arm rest is provided in the rear
seat which can be pulled out with a
loop.
For the removal of the rear seat
cushion see “ Practical Hints” .
Seat Heater
The front seat heaters can be
switched on with the steering lock in
positions “ 1” or “ 2” , the rear seat
heaters only in steering lock
position “ 2” .
The switches for the front seats are
located at the forward end of the
center tray, those for the rear seats
are accommodated in the rear doors.
Push switch to position 1 = contin
uous operation. The indicator lamp in
the switch comes on.
Push switch to position 2 = rapid
heating. Both indicator lamps in the
switch come on.
Switch in center position = seat
heater off.
Due to the relatively high power
consumption of the seat heater a
heavy load is placed on the battery.
For this reason the switch should not
be left in position 2 any longer than is
absolutely necessary while the engine
is switched off.
19
Summary of Contents for 300SD 1981
