background image

Safe Driving

slight drag on the w heels  is felt.  Keep 
applying  brakes fo r about  10 seconds 

while pulling release  knob out, then 

release parking brake com pletely.

This practice will keep the  parking 

brake at  maximum efficiency.

Warning!

The stop lamps will  not com e on when 

applying the parking  brake only. Apply 
parking brake only when  road  behind 

vehicle is clear o f traffic.

All checks and maintenance w ork on 
the brake system should  be carried 
out by a  MERCEDES-BENZ dealer.

If the parking brake is released and 

the brake warning lamp in the 

instrum ent cluster stays on, the  brake 

fluid level in the reservoir is too low. 

Brake pad wear or a leak in the 
system may be the reason fo r low 
brake fluid in the reservoir.

Have the  brake system  inspected at 

an  authorized MERCEDES-BENZ 

dealer w ithout delay.

Install only brake pads recom mended 
by us.  If other than recom mended 
brake pads are installed, the braking 
properties of the vehicle can  be 
affected to an extent that the safety is 
substantially impaired.

Brake Pad W ear Indicator Lamp

The brake pad wear indicator lamp in 

the instrum ent cluster com es on 

when the  key in the steering lock is 
turned to position  “ 2 ”  and  it 

m ust go out when the engine  is 
running.  If the indicator lamp lights up 

during braking, this show s that the 

fro n t wheel brake pads are worn.

Have the brake system  checked at an 

authorized MERCEDES-BENZ dealer 
as soon as possible.

Brake Fluid

Brake fluid should be changed once a 

year,  preferably in spring.

Only use brake fluid  recom m ended  by 
us.  For further inform ation,  refer to 
“ Fuels, Coolants,  Lubricants, e tc .” .

The low brake fluid indicator lamp will 

com e on if insufficient brake fluid  is in 

the reservoir.  (The  key m ust be  in 

steering  lock position  “ 2 ” ,  and the 
parking brake released.)

When the minimum  mark on the 

reservoir is reached,  have the system  
checked  (brake lining thickness, 
leaks).

Charge Indicator Lamp

S hould the charge indicator lamp fail 
to  com e on p rio r to  starting when the 

key is in steering  lock position  “ 2 ” or 

should  it fail to  go out after starting or 
during operation, this indicates a fault 
w hich m ust be repaired at an author­

ized  MERCEDES-BENZ dealer as 

soon as possible.

W hen the charging indicator lamp 

glow s w hile the engine is running, the 

V -belts may be lose or broken  (which 

makes the w ater pum p inoperative). 

This may cause overheating and dam­

age to  the engine.  In this case the 
V -belts  m ust be tightened or replaced 
at once.

Fuel Reserve Warning  Lamp

The fuel reserve warning lamp will 
com e on w hen the key in the steering 

lock is turned to  position “ 2 ” , and will 

go  out after the engine is running.

If the warning lamp stays on after the 

engine  starts, or com es on while 

driving,  it indicates that the fuel level 
is dow n to  the reserve quantity.

Summary of Contents for 300 TD-TURBO DIESEL 1985


































































































Reviews: