Sprinter 906
T57
Electric step, right sliding door
Details & Technology
The electric step moves out with the opening and moves in with the closing of the right sliding
door. This operation is possible without the use of the ignition key.
The electric step includes a sensor at the front side, so that in case of an obstacle collision
the step movement stops immediately. In this situation a warning signal sounds and if the
vehicle is equipped with the high line instrument cluster, code JK3, a visual warning signal will
be shown in the display. To reset the electric step it is necessary to close the sliding door.
The electric step dimensions are 1200 mm x 290 mm [47 ¼ Inches x 11½ Inches]. The
maximum permissible capacity is 150 kg [330 lbs.]
For 2-wheel Drive:
The access height from the ground to the Electric Step (
A
) is 286mm [11.3 Inches].
The height between the Electric Step and the Entrance Step (
B
) is 220mm [8.7 Inches].
Note
• In the area of the sliding door the ground clearance is reduced by
approx. 100 mm [3.9 Inches].
• The aluminum step with a hot-dip galvanized inserts has a weight of 42 kg [92.6 lbs].
A
B
©2015 Mercedes-Benz USA, LLC / Daimler Vans USA, LLC
301