Mercedes-Benz 2013 GL X166, Operator'S Manual

Page: 128 / 448

High-beam headlamps
:
High-beam headlamps
;
Turn signal, right
=
High-beam flasher
?
Turn signal, left
X
To switch on the high-beam headlamps:
turn the SmartKey in the ignition lock to
position
2 or start the engine.
X Turn the light switch to
L
or
Ã
.
X
Press the combination switch beyond the
pressure point in the direction of
arrow
:
.
In the
Ã
position, the high-beam
headlamps are only switched on when it is
dark and the engine is running.
The blue
K
indicator lamp in the
instrument cluster lights up when the high-
beam headlamps are switched on.
X
To switch off the high-beam
headlamps: move the combination switch
back to its normal position.
The blue
K
indicator lamp in the
instrument cluster goes out.
i Vehicles with Adaptive Highbeam Assist:
when Adaptive Highbeam Assist is active,
it controls activation of the high-beam
headlamps (
Y
page 127).
High-beam flasher
:
High-beam headlamps
;
Turn signal, right
=
High-beam flasher
?
Turn signal, left
X
To switch on: turn the SmartKey in the
ignition lock to position 1 or 2 or start the
engine.
X
Pull the combination switch in the direction
of arrow
=
.
Hazard warning lamps
X
To switch on the hazard warning lamps:
press button
:
.
All turn signals flash. If you now switch on
a turn signal using the combination switch,
only the turn signal lamp on the
corresponding side of the vehicle will flash.
X
To switch off the hazard warning
lamps: press button
:
.
126
Exterior lighting
Lights and windshield wipers