
Turn signal lamp (halogen headlamps)
X
Switch off the lights.
X
Open the bonnet.
X
Turn bulb holder
:
anti-clockwise and pull
it out.
X
Take the bulb out of bulb holder
:
.
X
Insert the new bulb into bulb holder
:
.
X
Insert bulb holder
:
and turn it clockwise
until it engages.
Cornering lamps (Intelligent Light Sys-
tem)
X
Switch off the lights.
X
Open the bonnet.
X
Turn housing cover
:
anti-clockwise and
pull it out.
X
Turn bulb holder
;
anti-clockwise and pull
it out.
X
Take the bulb out of bulb holder
;
.
X
Insert the new bulb into bulb holder
;
.
X
Insert bulb holder
;
into the lamp and turn
it clockwise.
X
Align housing cover
:
and turn it clock-
wise until it engages.
Replacing the rear bulbs
Opening and closing the side trim pan-
els
You must open the side trim panel in the boot
before you can replace the bulbs in the tail
lamps.
Left-hand side trim panel
X
To open: turn release knob
:
90° in the
direction of the arrow and remove side trim
panel
;
.
X
To close: insert side trim panel
;
and turn
release knob
:
90° in the opposite direc-
tion to the arrow.
Right-hand side trim panel
Replacing bulbs
117
Lights and windscreen wipers
Z
Summary of Contents for 2013 CLA
