Problems with the "cooling with air
dehumidification" function
If the indicator lamp in the
¿
button does
not go out when switched off, the cooling with
air dehumidification function is switched off
due to a malfunction. You can no longer
activate the cooling with air dehumidification
function.
X
Consult a qualified specialist workshop.
Setting climate control to automatic
If you switch off the cooling function, the
vehicle will not be cooled when weather
conditions are warm. The windows can fog up
more quickly. Window fogging may impair
visibility and endanger you and others.
In automatic mode, the set temperature is
maintained automatically at a constant level.
The system automatically regulates the
temperature of the dispensed air, the airflow
and the air distribution.
Automatic mode will achieve optimal
operation if cooling with air dehumidification
is also activated. If desired, cooling with air
dehumidification can be deactivated.
X
Turn the SmartKey to position
2 in the
ignition lock.
X
Set the desired temperature.
X
To activate: press the
Ã
button.
The indicator lamp above the
Ã
button
lights up. Automatic air distribution and
airflow are activated.
X
3-zone automatic climate control: press
switch
G
up or down and select the
FOCUS
Air flow high/air distribution via
the center and side vents
MEDIUM Air flow medium/air distribution
via the center and side vents
DIFFUSE Air flow low/air distribution via the
center, side and defroster vents
i
This setting is especially effective in
automatic mode when outside
temperatures are high.
X
To deactivate: press the air distribution
button.
Dual-zone automatic climate control: press
button
F
3-zone automatic climate control: press
button
I
The indicator lamp above the
Ã
button
goes out.
or
X
Press the airflow button.
Dual-zone automatic climate control: press
button
G
3-zone automatic climate control: press
button
H
The indicator lamp above the
Ã
button
goes out.
Dual-zone automatic climate control
Different temperatures can be set for the
driver's and front-passenger sides.
X
Turn the SmartKey to position
2 in the
ignition lock.
X
To increase/reduce: press button
E
or
H
Only change the temperature setting in
small increments. Start at 72 ‡ (22 †).
Operating the control systems
139
Climate control
BA 212 USA, CA Edition B 2011; 1; 5, en-US
dimargi
Version: 3.0.3.6
2010-05-20T13:33:46+02:00 - Seite 139
Z
