Replacing the wiper blades
For safety reasons, switch off the windshield
wipers and remove the key from the ignition
lock before changing the wiper blades
(vehicles with KEYLESS-GO: make sure that
the on-board electronics are in state
0).
Otherwise, the wiper motor could be switched
on suddenly and cause injury.
!
To avoid damaging the wiper blades,
make sure that you touch only the wiper
arm of the wiper.
!
Never open the hood if a windshield wiper
arm has been folded away from the
windshield.
Never fold a windshield wiper arm without
a wiper blade back onto the windshield/
rear window.
Hold the windshield wiper arm firmly when
you change the wiper blade. If you release
the windshield wiper arm without a wiper
blade and it falls onto the windshield, the
windshield may be damaged by the force of
the impact.
Mercedes-Benz recommends that you have
the wiper blades replaced by a qualified
specialist workshop, e.g. at an authorized
Mercedes-Benz Center.
Replacing the windshield wiper blades
Removing the wiper blades
X
Remove the key from the ignition lock or
turn the key to position
0 (KEYLESS-GO).
X
Fold the wiper arm away from the
windshield until it engages.
X
Set the wiper blade at right angles to the
wiper arm.
X
Remove the wiper blade from the retainer
on the wiper arm in the direction of the
arrow.
Installing the wiper blade
X
Slide the new wiper blade into the retainer
on the wiper arm in the opposite direction
to the arrow.
Make sure that the wiper blade slides fully
into the retainer on the wiper arm.
X
Turn the wiper blade parallel to the wiper
arm.
X
Fold the wiper arm back onto the
windshield.
Replacing the rear window wiper blade
The wiper arm could be set in motion and
injure you if the windscreen wipers are
switched on.
Remove the key from the ignition lock before
replacing the wiper blade.
Removing the wiper blade
Windshield wipers
129
Lights and windshield wipers
BA 212 USA, CA Edition B 2011; 1; 5, en-US
dimargi
Version: 3.0.3.6
2010-05-20T13:33:46+02:00 - Seite 129
Z
