R
knocking/pinging
R
misfire
R
power loss
In areas where carbon deposits may be
encountered due to lack of availability of
gasoline which contains these additives,
Mercedes-Benz recommends the use of
additives approved for use in Mercedes-Benz
vehicles.
Consult an authorized Mercedes-Benz Center
or visit
http://www.mbusa.com (USA only)
to view a list of approved products. Observe
the instructions for use on the product label.
Do not mix other fuel additives with fuel. This
causes unnecessary costs and could damage
the engine.
!
Do not refuel with low-grade fuel and do
not use fuel additives that are not tested
and approved for Mercedes-Benz vehicles.
Damage or malfunctions can result that are
not covered:
R
by the Mercedes-Benz Limited Warranty
R
by an existing Limited Warranty
R
by an extended Limited Warranty
Important safety notes
i
For BlueTEC vehicles only.
AdBlue
®
is a non-flammable, non-toxic,
colorless, odorless and water-soluble fluid.
!
Only use AdBlue
®
that complies with
ISO 22241. Do not add any special
additives to AdBlue
®
and do not thin
AdBlue
®
with water. This could destroy the
BlueTEC exhaust gas aftertreatment.
!
Rinse surfaces that have come into
contact with AdBlue
®
immediately with
water or remove AdBlue
®
using a damp
cloth and cold water. If the AdBlue
®
has
already crystallized, use a sponge and cold
water to clean it. AdBlue
®
residues
crystallize after time and contaminate the
affected surfaces.
High outside temperatures
If AdBlue
®
is heated to above 122 ‡ (50 †)
for an extended period of time, e.g. due to
direct sunlight on the AdBlue
®
tank,
AdBlue
®
may start to decompose. Ammonia
vapors develop as a result.
When opening the filler cap of the AdBlue
®
tank ammonia gas vapors may escape. Refill
AdBlue
®
in a well ventilated area only.
Ammonia gas vapors have a pungent odor and
are particularly irritating for your skin,
mucous membranes, and eyes. Inhaling
ammonia gas vapors will cause burning eyes,
nose, and throat, as well as coughing and
watering eyes.
Low outside temperatures
AdBlue
®
freezes at a temperature of
approximately 12 ‡ (-11 †). The vehicle is
equipped with an AdBlue
®
preheating system
at the factory. Winter operation can thus be
guaranteed even at temperatures below
12 ‡ (-11 †).
Additives
!
Use only AdBlue
®
complying with ISO
22241. Do not use any additives with
AdBlue
®
and do not thin AdBlue
®
with
water. This may destroy the BlueTEC
exhaust gas aftertreatment system.
Damage resulting from the use of additives
or water is not covered by the Mercedes-
Benz Limited Warranty.
Purity
Assuring the purity of AdBlue
®
is particularly
important with respect to avoiding
malfunctions in the exhaust gas
aftertreatment system.
390
Service products and capacities
Technical data
BA 212 USA, CA Edition B 2011; 1; 5, en-US
dimargi
Version: 3.0.3.6
2010-05-20T13:33:46+02:00 - Seite 390