!
To avoid damaging the wiper blades,
make sure that you touch only the wiper
arm of the wiper.
Removing the wiper blades
X
Remove the key from the ignition lock or
turn the key to position
0 (KEYLESS-GO).
X
Fold the wiper arm away from the
windshield until it engages.
X
Set the wiper blade at right angles to the
wiper arm.
X
Remove the wiper blade from the retainer
on the wiper arm in the direction of the
arrow.
Installing the wiper blade
X
Slide the new wiper blade into the retainer
on the wiper arm in the opposite direction
to the arrow.
Make sure that the wiper blade slides fully
into the retainer on the wiper arm.
X
Turn the wiper blade parallel to the wiper
arm.
X
Fold the wiper arm back onto the
windshield.
Problems with the windshield wipers
The windshield wipers are obstructed
Leaves or snow, for example, may be
obstructing the windshield wiper movement.
The wiper motor has been deactivated.
X
For safety reasons, you should remove the
key from the ignition lock.
or
X
Switch off the engine using the Start/Stop
button and open the driver's door.
X
Remove the cause of the obstruction.
X
Switch the windshield wipers back on.
The windshield wipers are inoperative
The windshield wiper drive is malfunctioning.
X
Select another wiper speed on the
combination switch.
X
Have the windshield wipers checked at a
qualified specialist workshop.
Windshield wipers
117
Lights and windshield wipers
BA 204 USA, CA Edition A 2011; 1; 5, en-US
hereepe
Version: 3.0.3.6
2010-05-20T09:17:30+02:00 - Seite 117
Z
