Mercedes-Benz 2009 G 55 AMG, Operator'S Manual

Page: 232 / 264

X Insert the bulb socket back into side
marker lamp housing
;
.
X
Reinstall dust cover
=
.
X
Reinstall side marker lamp housing
;
.
X
Install and tighten securing screws
:
.
i Do not overtighten securing screws
:
.
Otherwise side marker lamp housing
;
could be damaged.
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following:
X Switch off the ignition.
X Turn the exterior lamp switch to position
$
.
Removing/installing rear lamp guard
(G 55 AMG only)
X
Remove screws
;
.
X
Swivel rear lamp guard
:
outward. Make
sure the guard does not strike painted
surfaces.
X
Swivel rear lamp guard
:
back after
replacing bulbs and fasten it with
screws
;
.
Tail lamp unit
X
G 55 AMG only: Remove the rear lamp
guard.
Example illustration: Left tail lamp lens (right tail
lamp lens laterally reversed)
X
Loosen and remove securing screws
:
.
X
Remove tail lamp lens
;
.
Example illustration: Left tail lamp unit (right tail
lamp unit laterally reversed)
=
Turn signal lamp bulb
?
Brake, tail, parking and standing lamp
bulb
A
Tail, parking and standing lamp bulb
X
Gently press onto respective bulb
=
,
?
,
or
A
and turn counterclockwise out of its
bulb socket.
X
Gently press the new bulb into the bulb
socket and turn clockwise until it engages.
X
Reinstall tail lamp lens
;
.
X
Install and tighten securing screws
:
.
230
Replacing bulbs
Practical hints
463_AKB; 2; 52, en-US
d2ureepe,
Version: 2.11.7.1
2008-12-02T10:52:11+01:00 - Seite 230